FSP300-60THN 300W Power Supply
Sparkle FSP300-60THN 300 Watts ATX12V 2.0 Switching Power Supply
P/N: 9PA3007800, 9PA3007802, 9PA3007814
Connectors:
1 x 24-Pin ATX Main connector
1 x One 12V square connector
4 x IDE 4 PIN connectors
1 x Floppy 4 PIN connector
1 x SATA connector
2 x SATA connectors (come with additional IDE to SATA adapter)
Features
Complied with ATX12V 2.0 standard
High efficiency and reliability
Remote On/Off function
Internal 12V DC fan included
Noise Killer (Thermal fan speed control function)
Low noise and ripple
Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Approved by UL 60950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
Specification
Temperature Range: Operating 0°C ~ +25°C on full load; De-rate 2W/C from +50°C to +25°C; storage & shipping -20°C ~ +65°C
Humidity: 90% on operating and 95% on storage
Dielectric Withstand: Input to frame ground 1800V AC for 1 second
Efficiency: 70% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time: Less than 20ms on all output
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Not exceed 3.5mA
MTBF: 100,000 hours on maximum load at +25°C degree
Dimension (WxHxL): 150x86x140 mm / 6"x3.4"x5.5" inches
Input Characteristics
Input Range: +/-10% of 115 / 230 V, Manual selection
Frequency: 47~63Hz
Input Current: 7A (RMS) @115V AC, 3.5A (RMS) @230V AC
Inrush Current: 80A max cold start, 100A warm measured at 264rms/50Hz
|
